Elco Lighting E3LRC08ICA2
E3LRC08ICA2 Product DescriptionMix and match any ring finish with any reflector finish
UL Listed for direct contact with insulation.
Optional 90 minutes, 120/277 VAC, 60Hz, Emergency Backup.
USA designed and assembled.
Limited 5 year warranty.
For use with ELCO Cedar™ System 3" LED Light Engines.
2 at the end of the item number denotes Generation 2. Please note Gen 2 and Gen 1 are not cross compatible.
Voltage 120/277V or 120V
Power Factor ≥0.95
Construction: Single wall IC rated for direct contact with insulation. For use in IC and non-IC conditions. Up to 850
lumens. Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Installation: Designed for ceiling plenums where 2x6 joists or taller are used. Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Two 3/4” knockouts, Seven 1/2” trade size
conduit knockouts, One 3/8" knockout. Four Pry-out knockout slots for easy romex installation.
Driver is rated for 120V and 277V input (120/277V).
High Efficiency driver with a power factor > 0.95.
Dimmability: 3 in 1 dimming: Triac, ELV and 0-10V dimming in one driver. 0-10V dimming down to 5% with compatible dimmer. Can be specified with Lutron drivers for 0.1% and 1% dimming. For full list of dimmers refer to the Dimmer Compatibility List.
Listings: UL Listed for Damp Location and for Wet Location with select trims. UL Listed for Direct Contact with Insulation and Combustible Material. UL Listed for Feed Through.