Elco Lighting E6LRC12D2 6 Inches Cedar System Remodel Housing w/Driver, Voltage 120/277V, Dimming Triac/ELV/0-10V for $62.85
SKU
E6LRC12D2
In stock
Elco Lighting E6LRC12D2
E6LRC12D2 Product Description
Non-IC Airtight remodel housing for residential and light commercial, 850 to 2000 lumens. Optional 90 minutes, 120/277 VAC, 60Hz, Emergency Backup.
Meets Title 24 requirements.
Flicker-Free Dimming.
USA designed and assembled.
Limited 5 year warranty.
For use with ELCO Cedar™ System 6" LED Light Engines.
2 at the end of the item number denotes Generation 2.
Please note Gen 2 and Gen 1 are not cross compatible.
Specifications
Lumens 1250 lm
Voltage 120/277V
Dimmable Triac/ELV/0-10V
Power Factor ≥0.95
Damp Location Listed
Construction:
Non-IC Frame for non-IC conditions. Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Installation:
Designed for ceiling plenums where 2x8 joists or taller are used.
Suitable for T-grid and drop ceiling applications.
See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Two 3/4” knockouts, Seven 1/2” trade size conduit knockouts, One 3/8" knockout. Four Pry-out knockout slots for easy romex installation.
Electrical:
Driver is rated for 120V and 277V input (120/277V).
High Efficiency driver with a power factor > 0.95.
Dimmability:
3 in 1 dimming: Triac, ELV and 0-10V dimming in one driver.
0-10V dimming down to 5% with a compatible dimmer.
Can be specified with Lutron drivers for 0.1% and 1% dimming.
For a full list of dimmers refer to the Dimmer Compatibility List.
Listings: UL Listed for Damp Location and for Wet Location with select trims. UL Listed for Feed Through.
Meets Title 24 requirements.
Flicker-Free Dimming.
USA designed and assembled.
Limited 5 year warranty.
For use with ELCO Cedar™ System 6" LED Light Engines.
2 at the end of the item number denotes Generation 2.
Please note Gen 2 and Gen 1 are not cross compatible.
Specifications
Lumens 1250 lm
Voltage 120/277V
Dimmable Triac/ELV/0-10V
Power Factor ≥0.95
Damp Location Listed
Construction:
Non-IC Frame for non-IC conditions. Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Installation:
Designed for ceiling plenums where 2x8 joists or taller are used.
Suitable for T-grid and drop ceiling applications.
See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Two 3/4” knockouts, Seven 1/2” trade size conduit knockouts, One 3/8" knockout. Four Pry-out knockout slots for easy romex installation.
Electrical:
Driver is rated for 120V and 277V input (120/277V).
High Efficiency driver with a power factor > 0.95.
Dimmability:
3 in 1 dimming: Triac, ELV and 0-10V dimming in one driver.
0-10V dimming down to 5% with a compatible dimmer.
Can be specified with Lutron drivers for 0.1% and 1% dimming.
For a full list of dimmers refer to the Dimmer Compatibility List.
Listings: UL Listed for Damp Location and for Wet Location with select trims. UL Listed for Feed Through.
Write Your Own Review
More from ELCO Lighting
