UL Listed for direct contact with insulation. Optional 90 minutes, 120/277 VAC, 60Hz, Emergency Backup. Meets Title 24 requirements. Flicker-Free Dimming. USA designed and assembled. Limited 5 year warranty. For use with ELCO Cedar™ System 6" LED Light Engines. 2 at the end of the item number denotes Generation 2. Please note Gen 2 and Gen 1 are not cross compatible.
Specifications Lumens 850 lm Voltage 120/277V Dimmable Triac/ELV/0-10V Power Factor ≥0.95 Damp Location Listed
Construction: Single wall IC rated for direct contact with insulation. For use in IC and non-IC conditions. Up to 1250 lumens. Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Installation: Designed for ceiling plenums where 2x8 joists or taller are used. Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Two 3/4” knockouts, Seven 1/2” trade size conduit knockouts, One 3/8" knockout. Four Pry-out knockout slots for easy romex installation.
Electrical: Driver is rated for 120V and 277V input (120/277V). High Efficiency driver with a power factor > 0.95.
Dimmability: 3 in 1 dimming: Triac, ELV and 0-10V dimming in one driver. 0-10V dimming down to 5% with a compatible dimmer. Can be specified with Lutron drivers for 0.1% and 1% dimming. For a full list of dimmers refer to the Dimmer Compatibility List.
Listings: UL Listed for Damp Location and for Wet Location with select trims. UL Listed for Direct Contact with Insulation and Combustible Material. UL Listed for Feed Through.