ELCO Lighting EL39A 3 Inches New Construction Single Wall Housing Watt 50W, Voltage 120V for $14.96
SKU
EL39A
In stock
ELCO Lighting EL39A
EL39A Product Description
3" single wall housing for new construction applications. For use with MR16 lamps with GU10 base. Single wall construction with Thermal Protector
Lamp: 50W max 120V GU10 MR16
For use in non-insulated ceilings
Lamp Holder: Twist-and-lock GU10 MR16 lamp holder
Trims sold separately
Lamp: 50W max 120V GU10 MR16
For use in non-insulated ceilings
Lamp Holder: Twist-and-lock GU10 MR16 lamp holder
Trims sold separately
Wattage 50W
Voltage 120V
Lamp Type GU10
Wet Location Listed with Shower Trims
Damp LocationListed
Construction:
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easilty be nailed to joists. Maximum hole cutout is 3 5/8". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 3" MR16 trims.
Lamp: Designed for use with GU10 MR16 LED lamps.
Dimmability: Dimmability based on lamp.
Listings:
• UL Listed for Damp Location.
• UL Listed for Wet Location with select trims.
• UL Listed for Feed Through.
• Airtight per ASTM E-283.
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance.
Warranty: ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 3 years
Voltage 120V
Lamp Type GU10
Wet Location Listed with Shower Trims
Damp LocationListed
Technical Details
Construction:
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easilty be nailed to joists. Maximum hole cutout is 3 5/8". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 3" MR16 trims.
Lamp: Designed for use with GU10 MR16 LED lamps.
Dimmability: Dimmability based on lamp.
Listings:
• UL Listed for Damp Location.
• UL Listed for Wet Location with select trims.
• UL Listed for Feed Through.
• Airtight per ASTM E-283.
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance.
Warranty: ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 3 years
Write Your Own Review
More from ELCO Lighting
