ELCO Lighting EL39RA 3 Inches Remodel Airtight Miniature Housing Watt 50W, Voltage 120V for $14.96
SKU
EL39RA
In stock
ELCO Lighting EL39RA
EL39RA Product Description
3" airtight miniature housing for remodel applications. For use with 50W GU10 MR16 lamp. Single wall construction.
For use in non-insulated ceilings, where insulation
must be kept 3" from all sides of fixture.
Integral thermal protector guards against improper
lamping.
Lamp: 50W MAX 120V GU10 MR16.
Lamp Holder: Twist-and-lock GU10 MR16 lampholder.
Trims sold separately.
For use in non-insulated ceilings, where insulation
must be kept 3" from all sides of fixture.
Integral thermal protector guards against improper
lamping.
Lamp: 50W MAX 120V GU10 MR16.
Lamp Holder: Twist-and-lock GU10 MR16 lampholder.
Trims sold separately.
Wattage 50W
Voltage 120V
Lamp Type GU10
Damp LocationListed
Construction:
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
• Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x6 joists or taller joists are used. Maximum hole cutout is 3 5/8". Suitatble for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 3" MR16 trims.
Lamp: Designed for use with GU10 MR16 LED lamps.
Dimmability:
• Dimmability based on lamp.
Listings:
• UL Listed for Damp Location.
• UL Listed for Wet Location with select trims.
• UL Listed for Feed Through.
• Airtight per ASTM E-283.
Voltage 120V
Lamp Type GU10
Damp LocationListed
Technical Details
Construction:
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
• Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x6 joists or taller joists are used. Maximum hole cutout is 3 5/8". Suitatble for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 3" MR16 trims.
Lamp: Designed for use with GU10 MR16 LED lamps.
Dimmability:
• Dimmability based on lamp.
Listings:
• UL Listed for Damp Location.
• UL Listed for Wet Location with select trims.
• UL Listed for Feed Through.
• Airtight per ASTM E-283.
Write Your Own Review
More from ELCO Lighting
