ELCO Lighting EL770ICDXA 6 Inch 0-10V IC New Construction Dedicated LED Housing 120/277V EL770ICDXA

SKU
EL770ICDXA
$20.88
-
+

ELCO Lighting EL770ICDXA

EL770ICDXA Product Description


6″ 0-10V IC New Construction Dedicated LED Housing

Wired for 0-10V Dimming
Single Wall IC Airtight rated for direct contact with
insulation
120/277V Input
Meets restricted air flow requirements (per ASTM E-283)
UL listed for direct contact with insulation
UL listed for wet locations with wet location inserts
UL listed for feed through
CA Title 24 compliant

Voltage 120/277V
Lamp Type LED

Construction: Shallow Single wall IC rated for direct contact with insulation, for use in IC or non-IC conditions.Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness. Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements. Steel housing for greater heat dissipation. Stamped galvanized steel frame.

Installation: Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easilty be nailed to joists. Maximum hole cutout is 6 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.

Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts. Pry-out knockout slots. 4 Romex pryouts with strain relief.

Hanger Bars: Pre-installed hanger bars with TrueNail facilitate easy installation in regular lumber, engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for
single-person installation while aligning the housings with the joists. Hanger bars ordered separately for EL760ICDXA-B (Butterfly Bracket).

Electrical: Input Voltage: 120/277V. Inherently protected. Fixture rated for 24W MAX. LED insert

Trims: Compatible with ELCO 6" 0-10V LED Inserts
.
Dimmability: Dimmability based on insert used. See PLY™ System LED inserts.

Lamp: Designed for use with ELCO 6" PLY™ LED inserts.

Listings: UL Listed for Damp Location. UL Listed for Wet Location with select trims. UL Listed for Feed Through. UL Listed for Direct Contact with Insulation and Combustible Material. Airtight per ASTM E-283. JA8-2016-E Title 24 Compliant.

Warranty: ELCO Lighting warrants products will be free from defects in materials and workmanship for a period of 5 years

About ELCO Lighting

Founded in 1991 by its president, Steve Cohen, ELCO Lighting develops and markets lighting products for commercial and residential applications. Founded on the philosophy that high-quality commercial and residential lighting should be sold at a fair market price, Elco Lighting has designed and engineered lighting for residential and commercial spaces for almost two decades. Their product line includes track and recessed lighting fixtures, exit and emergency lights, under cabinet lighting, wall packs, step lights and more.
More Information
Dimmable No
Write Your Own Review
You're reviewing:ELCO Lighting EL770ICDXA 6 Inch 0-10V IC New Construction Dedicated LED Housing 120/277V EL770ICDXA