ELCO Lighting EL99RICA 4 Inch IC Remodel Housing With Adjustable Lampholder for $16.3
SKU
EL99RICA
In stock
ELCO Lighting EL99RICA
EL99RICA Product Description
ELCO Lighting 4 Inch IC Remodel Housing with Adjustable Lampholder Single Wall Remodel Airtight IC construction, for use in
insulated ceilings.
Adjustable socket bracket allows the use of different
lamp types and sizes as well as proper and consistent
positioning.
Four remodel clips secure housing and accommodate
various ceiling thickness.
Adjustable socket bracket allows for different lamp
types/sizes and proper and consistent lamp positioning.
Pre-wired junction box provided with 1/2" and 3/4"
knockouts and with removable access plates.
Trims sold separately.
Lamp: 50W MAX, 120V, PAR20/R20 (not
included), Lamp Holder: (E26) Medium base socket.
CA Title 24 compliant (as low efficiency luminaire).
UL listed for damp location and for feed through.
Specifications:
Wattage 50W
Voltage 120V
Lamp Type Medium Base (E26)
Damp Location Listed
Technical Details:
Construction:
• IC rated for direct contact with insulation, for use in IC or non-IC conditions.
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
• Aluminum housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x8 joists or taller are used. High strength hanger bars can
easily be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications. See
installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size pryout conduit
knockouts, 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-grids. Spans up to 24"
and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange
allows for single-person installation while aligning the housing with the joists.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 4" Line Voltage PAR trims.
Lamp: Designed for use with Medium Base (E26) PAR lamps up to 50W.
Listings:
• UL Listed for Damp Location.
• UL Listed for Feed Through.
• UL Listed for Direct Contact with Insulation and Combustible Material.
• Airtight per ASTM E-283.
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance.
insulated ceilings.
Adjustable socket bracket allows the use of different
lamp types and sizes as well as proper and consistent
positioning.
Four remodel clips secure housing and accommodate
various ceiling thickness.
Adjustable socket bracket allows for different lamp
types/sizes and proper and consistent lamp positioning.
Pre-wired junction box provided with 1/2" and 3/4"
knockouts and with removable access plates.
Trims sold separately.
Lamp: 50W MAX, 120V, PAR20/R20 (not
included), Lamp Holder: (E26) Medium base socket.
CA Title 24 compliant (as low efficiency luminaire).
UL listed for damp location and for feed through.
Specifications:
Wattage 50W
Voltage 120V
Lamp Type Medium Base (E26)
Damp Location Listed
Technical Details:
Construction:
• IC rated for direct contact with insulation, for use in IC or non-IC conditions.
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
• Aluminum housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x8 joists or taller are used. High strength hanger bars can
easily be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications. See
installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size pryout conduit
knockouts, 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-grids. Spans up to 24"
and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange
allows for single-person installation while aligning the housing with the joists.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 4" Line Voltage PAR trims.
Lamp: Designed for use with Medium Base (E26) PAR lamps up to 50W.
Listings:
• UL Listed for Damp Location.
• UL Listed for Feed Through.
• UL Listed for Direct Contact with Insulation and Combustible Material.
• Airtight per ASTM E-283.
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance.
Write Your Own Review
More from ELCO Lighting
