Nora Lighting NHIC-926QAT/25 6 Inch Incandescent IC AIR-TIGHT Slope Housing 25W NHIC-926QAT/25

SKU
NHIC-926QAT/25
$63.14
-
+

NORA Lighting NHIC-926QAT/25

NHIC-926QAT/25 Product Description


Nora Lighting’s IC construction housing for sloped ceiling offer a clear path of unobstructed light from a 6/12 pitch ceiling to any floor or surface or 12/12 pitch with designated trims. Air-tight housing additionally reduces energy costs by decreasing the flow or air escaping through the ceiling. Rated for direct contact with insulation and adjacent ceiling structures. Nora’s sloped IC housings are easy and quick to install and accepts standard down light or adjustable finishing trims.

IC rated for direct contact with insulation
ASTM E283 for Air-Tight
cULus listed for damp location and feed through
Ceiling adjustment bracket with internal lamp position compensation
2/12 - 6/12 ceiling pitch capability
Quick connectors provided

Construction
Plaster Frame: High quality .035 steel die cut one piece frame. Bar hanger brackets on all four sides provide two possible positions for installations. Integral brackets and wingnuts enable housing to be adjusted for 2/12 - 6/12 ceiling pitch.

Housing: 0.035 steel housing. Riveted wrap and dome cap construction. Integral fold-out torsion spring brackets. Knockouts near top of housing provided for coil springs.

Air Flow Restriction: Meets requirements of Air-Tight (AT) <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.

Clearance*: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.

Bar Hangers: Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90º perpendicular to junction box if desired. "L" Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling. Accepts ceiling thickness from 5/8" to 1-3/8".

Junction Box: Prewired 25 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).

Electrical
Voltage: 120V input
Socket: Medium screw-in base
Max. Wattage / Lamp Type:
75W PAR/R30
40W A19

Dimming: Triac / ELV or 0-10V Dimming, as specified on reflector / housing combination.

LABELS AND LISTINGS
cULus Listed for Damp location & feed through
WSEC ASTM E283 for Air-Tight

About Nora Lighting

After stepping into the lighting game just a little over 20 years ago, Nora lighting has sprinted its way to the top of light fixture suppliers. With a team of the most hip design experts and engineering technologies Nora lights can add a modern, yet dependable edge to your home, job, or college dorm. Nora track lighting and recessed lighting are amongst the best available. So why not play it stylish and smart and go with Nora lighting?
More Information
Dimmable No
Write Your Own Review
You're reviewing:Nora Lighting NHIC-926QAT/25 6 Inch Incandescent IC AIR-TIGHT Slope Housing 25W NHIC-926QAT/25