Nora Lighting NHRIOIC-48LE3A 4 Inch Iolite Dedicated IC Air-Tight Remodel Housing 800-1000lm for $50.67
SKU
NHRIOIC-48LE3A
In stock
Nora Lighting NHRIOIC-48LE3A
NHRIOIC-48LE3A Product Description
Dedicated LED Remodel housing for 4″ Iolite reflectors. Remodel housing is rated for use in insulated ceilings and can be in direct contact with insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. · IC rated for direct contact with insulation**
· Quick connect provided for electrical connection to the LED reflector
· ASTM E283 for Air-Tight
· Dimming down to 5%
Housing:
0.030 steel can connects to integrated 0.040 steel structural arm with junction box and driver compartment. Integral spring brackets provided.
Air Flow Restriction:
Housing has factory installed gaskets to restrict airflow from room into ceiling plenum
to <2CFM (cubic feet per minute) in accordance with ASTM283 Air-Tight requirements.
Clearance**:
“IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.
Mounting:
Four high-tension tempered steel springs secure remodel housing from 1/4” (min) to 5/8” (max) thick ceiling. Hole cutout template provided for convenience.
Junction Box:
Pre-wired 25 cubic inch 0.064” thick galvanized steel, with five 1/2”, two 3/4” knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).
· Quick connect provided for electrical connection to the LED reflector
· ASTM E283 for Air-Tight
· Dimming down to 5%
SPECIFICATION :
SPECIFICATIONHousing:
0.030 steel can connects to integrated 0.040 steel structural arm with junction box and driver compartment. Integral spring brackets provided.
Air Flow Restriction:
Housing has factory installed gaskets to restrict airflow from room into ceiling plenum
to <2CFM (cubic feet per minute) in accordance with ASTM283 Air-Tight requirements.
Clearance**:
“IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.
Mounting:
Four high-tension tempered steel springs secure remodel housing from 1/4” (min) to 5/8” (max) thick ceiling. Hole cutout template provided for convenience.
Junction Box:
Pre-wired 25 cubic inch 0.064” thick galvanized steel, with five 1/2”, two 3/4” knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).
Write Your Own Review
More from NORA Lighting
