Nora lighting NL-301AT/1EL 3" Air-Tight Low Voltage New Construction Housing Simple Adjustable Trim Transformer EL NL-301AT/1EL
SKU
NL-301AT/1EL
NORA Lighting NL-301AT/1EL
NL-301AT/1EL Product Description
Three-inch low voltage housing with integral transformer for use in new constructions.
Low 4-1/2" (115mm) profile for shallow plenums.
24" T-Bar compatible adjustable bar hangers with nails.
Quick connectors provided.
UL listed for through branch circuit wiring and use in damp locations.
Extensive selection of decorative trims.
24" T-Bar compatible adjustable bar hangers with nails.
Quick connectors provided.
UL listed for through branch circuit wiring and use in damp locations.
Extensive selection of decorative trims.
Bar Hangers Two 13-5/8”to 24”adjustable bar hangers with nails are included on frame. Bar hangers are perpendicular to junction box,but can be repositioned 90˚ parallel to junction box if desired. Bar hanger foot contoured to align to bottom of construction joist.A T-Bar notch allow for easy installation in a suspended ceiling.
Housing
1. Plaster Frame - .025 steel frame with integral bar hanger brackets. Brackets can accommodate longer 27" accessory flat bar hangers. Shiping screw installed to provide extra security for transformer during shipment - remove before installation.
2. Housing - .050 white baked enamel one-piece drawn steel housing.
3. Mounting -Two 24" bar hangers included for installation. Ends of bar hangers contain nails for securing bar hanger into the side of a wood joist without damaging the wood grain.
Clearance Non-IC Housings require a minimum clearance of 3" around fixture from thermal insulation and 1/2" above the fixture from combustible material.
Electrical System
1. Transformer – Magnetic Class H 12V output transformer installed onto J-box. Also available in electronic specify /1EL for 120V,or /2EL for 277V.
2. Wiring - .060 steel wire way carries wire leads from J-box and transformer into housing. Wire
lead extends outside fixture with porcelain socket with heat shield.
3. Junction Box - Integrated 14 cu in junction box .060 galvanized steel with four 7/8” knockouts. 4 Romex pry-out - Green ground wire provided.
Lamp One 20-50W MR16 Halogen ordered separately. One 20-50W Bi-Pin GY6.35 Halogen ordered separately.
Trim Full assortment of decorative glass,reflectors,gimbals,baffle and adjustables. Includes clear lamp shield. Three (3) elbow friction clips riveted to trim secure trim tightly inside housing. Trims ordered separately.
Dimming Use magnetic low voltage dimming control with magnetic transformer or electronic low voltage dimming control with electronic transformer.
Labels and Listings cUL Listed – Approved for through-branch wiring with up to 8 #12 AWG conductors.
Housing
1. Plaster Frame - .025 steel frame with integral bar hanger brackets. Brackets can accommodate longer 27" accessory flat bar hangers. Shiping screw installed to provide extra security for transformer during shipment - remove before installation.
2. Housing - .050 white baked enamel one-piece drawn steel housing.
3. Mounting -Two 24" bar hangers included for installation. Ends of bar hangers contain nails for securing bar hanger into the side of a wood joist without damaging the wood grain.
Clearance Non-IC Housings require a minimum clearance of 3" around fixture from thermal insulation and 1/2" above the fixture from combustible material.
Electrical System
1. Transformer – Magnetic Class H 12V output transformer installed onto J-box. Also available in electronic specify /1EL for 120V,or /2EL for 277V.
2. Wiring - .060 steel wire way carries wire leads from J-box and transformer into housing. Wire
lead extends outside fixture with porcelain socket with heat shield.
3. Junction Box - Integrated 14 cu in junction box .060 galvanized steel with four 7/8” knockouts. 4 Romex pry-out - Green ground wire provided.
Lamp One 20-50W MR16 Halogen ordered separately. One 20-50W Bi-Pin GY6.35 Halogen ordered separately.
Trim Full assortment of decorative glass,reflectors,gimbals,baffle and adjustables. Includes clear lamp shield. Three (3) elbow friction clips riveted to trim secure trim tightly inside housing. Trims ordered separately.
Dimming Use magnetic low voltage dimming control with magnetic transformer or electronic low voltage dimming control with electronic transformer.
Labels and Listings cUL Listed – Approved for through-branch wiring with up to 8 #12 AWG conductors.
About Nora Lighting
After stepping into the lighting game just a little over 20 years ago, Nora lighting has sprinted its way to the top of light fixture suppliers. With a team of the most hip design experts and engineering technologies Nora lights can add a modern, yet dependable edge to your home, job, or college dorm. Nora track lighting and recessed lighting are amongst the best available. So why not play it stylish and smart and go with Nora lighting?| Dimmable | No |
|---|
Write Your Own Review
More from NORA Lighting
