Nora Lighting NLR-405AT 4" Low Voltage Remodel for Remote Transformer Housing for $14.62
SKU
NLR-405AT
In stock
NORA Lighting NLR-405AT
NLR-405AT Product Description
4” low voltage remodel housing with the capability of receiving 12V power from a remotely mounted Class 2 rated transformer. Depending on transformer, one to six fixtures can be connected to one single transformer as far away as 50 feet. Air-Tight construction offers energy savings by reducing the flow of air through the ceiling. A wide variety of attractive adjustable trims allows fine-tuned aiming of direction light sources.
Housing: 0.05 white baked enamel one-piece drawn aluminum housing.
Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.
Clearance: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2” from combustible material from above the fixture.
Mounting: Three high tension tempered steel springs secure remodel housing to to ceiling thicknesses from 3/8" to 1-3/8" (Hole cutout template provided for convenience).
ELECTRICAL
Input Voltage: 12V (transformer required)
Socket: Bi-Pin GU5.3 socket with heat shield
Wattage: 20W-50W (must specify)
Lamp: 12V MR16 (not included)
COMPATIBLE TRANSFORMERS
12V remote transformer ordered separately.
NETLED-060-LWBF: 60W Class II Lightech®, Bottom Feed
NETLED-060-LW: 60W Class II Lightech®, End Feed
NET-2060: 60W Class II Electronic, Individual Pack
Labels and listings
cULus Listed for Damp Location (wet location when used with compatible reflectors)
Meets or exceeds ASTM-283 Air-Tight requirements
Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.
Clearance: Non-IC housings require a minimum clearance of 3” from thermal insulation and 1/2” from combustible material from above the fixture.
Mounting: Three high tension tempered steel springs secure remodel housing to to ceiling thicknesses from 3/8" to 1-3/8" (Hole cutout template provided for convenience).
ELECTRICAL
Input Voltage: 12V (transformer required)
Socket: Bi-Pin GU5.3 socket with heat shield
Wattage: 20W-50W (must specify)
Lamp: 12V MR16 (not included)
COMPATIBLE TRANSFORMERS
12V remote transformer ordered separately.
NETLED-060-LWBF: 60W Class II Lightech®, Bottom Feed
NETLED-060-LW: 60W Class II Lightech®, End Feed
NET-2060: 60W Class II Electronic, Individual Pack
Labels and listings
cULus Listed for Damp Location (wet location when used with compatible reflectors)
Meets or exceeds ASTM-283 Air-Tight requirements
About Nora Lighting
After stepping into the lighting game just a little over 20 years ago, Nora lighting has sprinted its way to the top of light fixture suppliers. With a team of the most hip design experts and engineering technologies Nora lights can add a modern, yet dependable edge to your home, job, or college dorm. Nora track lighting and recessed lighting are amongst the best available. So why not play it stylish and smart and go with Nora lighting?Write Your Own Review
More from NORA Lighting
